Danuser SM40 Hammer
307-326-8880
800-300-8389 Toll Free
Request More Info / Get A Quote
- Grapple option can be added to any model for a true one-person operation (does not include t-posts). The grapple option will allow the operator to grab the post off the ground, load it into the machine, and drive it in the ground without leaving the skid-steer seat.
- Tilt option allows up to 20˚ in each direction.
- The hammer weight is 300 lb. from the factory. Additional weight can be added for a total of 500 lb.
- Skid-Steer, Tractor Front-End Loader Skid-Steer, and Euro/Global are standard mount options. Backhoe & excavator custom mounts are available.
Drives fence posts, sign posts, guard rails, median dividers, tent stakes, T-posts, pipe fence, and railroad ties with ease.
The Hammer DOES NOT operate with springs, hydraulic cylinder, or return line. Grapple option can be added to any model for a true one-person operation (does not include t-posts). The grapple option will allow the operator to grab the post off the ground, load it into the machine, and drive it in the ground without leaving the skid-steer seat. Tilt option allows up to 20˚ left or right. The hammer weight is 300 lb. from the factory. Additional weight can be added for a total of 500 lb.
Achieve a full stroke with every cycle or utilize the short stroke feature to fine tune your depth.
Specs | Danuser SM40 Standard Configuration |
---|---|
Post Dimensions | T-post to Railroad tie |
Impact Force | 49,000 lb. |
Impact Energy | 1,025 ft.-lb. |
Length of Stroke (inches) | 40″ |
Hammer Weight | 300 lb. |
Strokes per Minute | 35 |
Overall Length (inches) | 45.5″ |
Overall Width (inches) | 25″ |
Overall Height (inches) | 64″ |
Machine Weight | 915 lb. |
Hydraulic Requirements | 1,500 – 3,000 PSI; 12 – 30 GPM |
Maximum Post Width (inches) | 8.5″ x 9.25″ |
Tractor Requirements | 75 HP Minimum |